Stainless Steel Pipe

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

We are Stockiest And Suppliers of: Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve,

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

We are Stockiest And Suppliers of: Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve, En Material,We Will Provide Manufacturer's Test Certificate along with Supply Stainless Steel Quality (301,304,304L,316,316L,317L,310,310S,321,347,)

Product Details:

Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve,

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

STOCKISTS & PROJECT SUPPLIERS of Ferrous & Non-Ferrous Metals.

 

STAINLESS STEEL:-

Sheets, Plates, Chequered Plates, Tubes, Pipes, Erw Pipes, Seamless Pipes, Rods, Wires, Wire Mesh, Flats, Coils, Angles, Channels Etc.

 

PIPE & PIPE FITTINGS:-

Ball Valves, Elbows, Bends, Stubends, Tees, Flanges, Reducers, Nut & Bolts, in grade Of 202, 304, 304L, 316, 316L, 309, 310, 321 & 400 Series.

 

NON FERROUS:-

Copper, Brass, Aluminum, Phosphorus-bronze, Gunmetal in All Shapes & Sizes.

 

ALLOY STEEL:-

En-8, 9, 19, 24, 31, 36, 45, 47, Mn-Cr5 Etc in All Shapes & Sizes.

 

MILD STEEL:-

Sheets, Plates, Angles, Channels, Beam C.S Pipe & Tubes in ERW/SEAMLESS and pipe fittings with IBR in All Shapes & Sizes.

 

INDUSTRIAL VALVES:-

SS,CI,CS,GUN METAL,BRASS, Brands Available :- "L&T, AUDCO, SHENCO, SPIREX,WJ, SANT, ZOLOTO, SBM ",Screwed end, Flange end, Socked Weld Etc in All Shapes & Sizes.

Product Details:

We are Stockiest And Suppliers of: Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve,

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve

Product Details:

Stainless steel pipe resists oxidation, making it a low-maintenance solution that is suitable for high temperature and chemical applications. Because it is easily cleaned and sanitized, stainless steel pipe is also desired for applications involving food, beverages, and pharmaceutical applications.

Product Details:

OUR MAJOR PRODUCTS

FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE,
RAISED-FACE, RTJ, Etc

FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD &
SOCKET WELD), Etc.

ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE,
CHAIN SLING , POLYSTER SLINGS Etc

FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE
FLARE, Etc

FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD,
REFRACTORYANCHORS, Etc.

FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES,
CONDUITS, Etc.

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

We are Stockiest And Suppliers of: Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve,

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve

Product Details:

We are Stockiest And Suppliers of: Stainless Steel,Carbon Steel,Aluminum Alloy,Copper Brass, And SS MS GI Fittings, Butt Weld,Socket Weld,Forged Fittings,SS MS Flanges, SS Ms GI Fittings, SS MS GI Fasteners, SS MS IBR Valve,

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.   
                                                
 

Product Details:

DEAR SIROUR MAJOR PRODUCTS
FLANGES: - SLIP-ON, WELDNECK, BLIND, LAP JOINT, PLATE, ORIFICE, RAISED-FACE, RTJ, Etc
FITTINGS     : - ELBOW, TEE, REDUCER, CAP, UNION, NIPPLE, (BUTT WELD & SOCKET WELD), Etc.
ROPE & SLINGS: - WIRE  ROPES + SLINGS , SYNTHETIC ROPES , NATURAL FIBRE, CHAIN SLING , POLYSTER SLINGS Etc
FERRULES    : - SINGLE & DOULE FITTING, INSTRUMENT FITTINGS, 37 DEGREE FLARE, Etc
FASTENERS     : - NUT, BOLT, WASHER, SCREW, STUD, THREADED ROD, REFRACTORYANCHORS, Etc.
FLEXIBLE HOSE   : - STAINLESS STEEL CORRUGATED HOSES, STRIP WOUND HOSES, CONDUITS, Etc.
HANDLING MAT   :-PULLEY , TROLLEY , JACK , HOIST ,CLAMPS , SHACKELS , ANCHOR , CHAINS , HOOKS, EYE BOLT , TURNBUCKLES , Etc
HAMMER UNION  : - ALL TYPES OF HAMMER UNION
METAL GASKETS   : - RING JOINT GASKET IN OCTAGONAL OR OVAL, TYPE: R, RJ, RX or BX (SS, CS, OTHERS).
VALVES                  : - GATE VALVE, GLOBE VALVE, BALL VALVE, CHECK VALVE, BUTTERFLY, OTHERS, Etc
 
OUR MATERIAL RANGE
STAINLESS STEEL: - Sheets, Plates, Coils, Strips, Flats, Circles, Round, Wires, Hexagonal, Squares, Angles, Channels, Beam, Anchor,
Anchor Rod, Nuts, Bolts, Washers, Tubes, Pipes and All type of Pipe – Fittings, Etc.
GRADES  :- 202,304, 304L, 310, 310S, 316, 316L, 317, 321, 409, 410, 420, 430, 17- 4PH, Etc
CARBON STEEL  : - Plates, Sheet, Bars, Pipes in (ASTM A – 106 GR ‘B’, IS 1239, IS 3589 A- 53 GR A & B, A – 210 
GR A -1, BS 3059, Part – I, II, SA – 179 All Pipe & Pipe Fittings (IBR & NON-IBR), Etc
ALLOY STEEL   : - Plates, Bars, Pipes, and Fittings in ASTM A – 335 Gr, P1, P5, P9, P11, P12, P22, ST 37, Etc
ALUMINIUM   : - Plates, Sheets, Foil, Chq-Plates, Flats, Round Bar, Square Bar, Hex Bar, Rectangle Bar, Angles, Channels, Tubes, Pipes, Etc.
SPECIAL ALLOYS  : - COPPER, BRASS, NICKEL, MONEL, INCONEL, TITANIUM, HASTALLOY, GUN METAL, Etc.
 
PIPE FITINGS MFG. & SPECIALISTS OF: - STAINLESS-STEEL/CARBON-STEEL/ALLOYS-STEEL/G.I. PIPES-FITTINGS. B.W./S.W.  DAIRY FITTINGS, VALVES, FASTENERS, AS PER CUSTOMER DRAWINGS & SPECIFICATIONS.                                                                                                                                                                                                                                                                    
NON-FERROUS METAL:- NICKEL, NI- BASE ALLOYS, NI-CR, NI-FE, NI-CU,NI- SILVER, NIMONIC,BRASS, ADM- BRASS-NAVAL, COPPER ALLOYS, MONEL, INCONEL, INCOLLY, TITANIUM,TITANIUM-ALLOY,
HASTALLOY, LEAD, ZINC, P.B. GUN. METAL, ANTIMONI, COBALT. CADMIUM, KANTHEL ALLOYS, ETC.
 ALUMINIUM FOIL: WE STOCKIST & MFG OF BLISTER FOIL, TAGGER FOIL, STRIP FOIL, TRIPLE LAMINATED    FOIL, HOUSE FOIL, CABLE WRAP FOIL, LIDDING FOIL, LIGHT GUAGE CONVERTER FOIL, ETC.